"The ONLY Outrigger Pulley Designed To
Eliminate Halyard/Line Creep
By Locking Halyards In Place, Where You Want!
Designed for use with 2mm mono or 3/32-1/8" braided cord.
Anglers have been using outriggers on boats in search of more and bigger fish for many decades with major improvements and innovations from the days of the bamboo outriggers, but the pulleys used with the outriggers today are the same basic design used for thousands of years. Anglers trolling with outriggers know the aggravation of the release clip working back to the boat while trolling for trophies. The most common fix for this halyard / line creep has been to squeeze the halyards together above the pulley and tie a rubber band around them or wrap them with some wire so they will not slip, (then after catching a fish or a knock down you still have to untie or unwrap the halyard to bring your clip back to the boat), or to increase the tension on the halyard making you have to pull harder on the halyard to get the release clip in and back out.
The HAL-LOCK outrigger pulley was specially designed for speed and efficiency (and it looks good too). Simply pull the locking lever back and the halyard is pushed into the softer urethane insert locking the halyard in place. That Easy! That Fast!, and because of HAL-LOCK’s unique ability to lock, very little tension is required on the shock cord, allowing you to get your clip up and back down with less effort."